S7000
Power Supplies
Branson's
Series 7000 solid state
ultrasonic power supplies combine the economy of standardization with the
flexibility of modular design. Used
on a simple cleaning tank or with immersible transducers, Series 7000
Ultrasonic Power Supplies will deliver precision cleaning quickly,
consistently, and cost-effectively.
MODULARITY FOR SYSTEM FLEXIBILITYIndividual
S-7000 power supplies are housed in their own portable enclosures and
connected by RF cable to the other "building blocks" of custom
cleaning systems either Branson transducerized tanks or immersible
transducers. In combination,
these components form complete, specialized S-7000 ultrasonic cleaning
systems, offering the economy of standardization with the flexibility of
modular design.
Internal
modularity of the Series 7000 power supply allows individual units to
power 6 to 48transducers (in multiples of 6) in your choice of 25 or 40
kHz output frequencies.
STANDARD FEATURES
- Electrical System -
All Series 7000 power supplies meet the National Electrical Code and are equipped with RFI filters to meet FCC radio frequency interference standards. Each power supply is fuse-protected against malfunctions and line voltage surges. These power supplies are available with operating voltages to meet most international requirements.
- Simple operation -
Power supply has on/off switch with pilot light.
- Broad emperature range -
Operates in ambient temperatures from 35 F to 110F (1.70C to 43C).
- Air-cooled -
Cooling fan permits continuous power supply operation.
To
Match Tanks and Power Supplies
* Note -- Our shopping cart contains matched
sets of tanks and power supplies, with tank cover included. Please contact
us for pricing on separate components.
S7000 Ultrasonic Tanks
CLEANING
TANKS
Branson manufactures five standard size transducerized
tanks that range from a 2.6 to a 41 gallon capacity (1 0 to
155 liters).
- All have drains for easy cleaning.
-
Type 316L stainless steel construction throughout permits
the use of alkaline, mildly acidic or neutral aqueous solutions.
- Branson tanks are available with or without integral
heaters.
- The heated models maintain solution temperatures from ambient to 180OF (820C) thermostatically.
-
All models are available with a stainless steel parts basket
and/or tank cover.
STANDARD FEATURES
Bottom-mounted positive drain connection.
Fully shielded internal components.
OPTIONAL ACCESSORIES
Stainless steel parts basket for handling convenience.
Stainless steel tank cover.
NUMBERING SYSTEM
Each Branson transducerized tank has a model number
which contains important information to guide the selection
of a properly rated companion power supply.
For example: SH1012-40-12
This model number, stamped on the tank nameplate, indicates whether the tank has a heater (S = unheated, SH =
heated), the width of the tank in inches, left to right (1 0"),
the length of the tank in inches, front to back (1 2"), the operating frequency (40 kHz) and the
number of attached piezoelectric transducer elements (1 2).
POWER SUPPLY SELECTION FOR CLEANING TANKS
To select the correct power supply for your transducerized
cleaning tank, add the total number of transducer elements
involved by using the information from the model number
as explained. Then select a power supply whose last two
numbers exactly match the number of transducer elements
by referring to the power supply specification chart.
Back to top
S7000 Ultrasonic Tanks
|
| |
Model 1012-12
|
Model 1216-18
|
Model 1620-24
|
Model 2024-36
|
| Working
Dimensions: |
10"W x
12"L x 10"D
|
12"W x
16"L x 12"D
|
16"W x
20"L x 16"D
|
20"W x
24"L x 20"D
|
| Overall
Dimensions*: |
14"W x
16"L x 16H"
|
16"W x
20"L x 18"H
|
20"W x
24"L x 22"H
|
24"W x
28"L x 26"H
|
| Heater
Power: |
1000 Watts
|
2000 Watts
|
3000 Watts
|
3000 Watts
|
| Power
Requirements: |
120V/1p/8.5A
|
230V/1p/8.7A
|
230V/1p/13A
|
230V/1p/13A
|
| *
includes 7/8" horizontal flange on all four sides |
|
S7000
Power Supplies
|
| Model |
Frequency |
Trans-
ducers |
Voltage
Requirements |
Ave.
Output Power |
S7025-12
S7040-12 |
25 kHz
40 kHz |
12 |
120 V or
220 V +/-15% |
500 Watts |
S7025-18
S7040-18 |
25
kHz
40 kHz |
18 |
220
V +/- 15% |
750
Watts |
S7025-24
S7040-24 |
25 kHz
40 kHz |
24 |
220 V +/-
15% |
1000 Watts |
S7025-36
S7040-36 |
25
kHz
40 kHz |
36 |
220
V +/- 15% |
1500
Watts |
S7025-48
S7040-48 |
25 kHz
40 kHz |
48 |
220 V +/-
15% |
2000 Watts |
|
All units operate at
either 50/60 Hz
|
|
Copyright 2003 WA Brown Industrial Sales
Listed at ultrasoniccleaningsource.com.